- 1905
- 产品价格：面议
- 发货地址：河北衡水枣强县 包装说明：按要求包装
- 产品数量：715632.00 平米产品规格：规格齐全，可定制
- 信息编号：90670754公司编号：14468070
- 徐经理 微信 139328197..
- 进入店铺 在线咨询 QQ咨询 在线询价
安国脱硫塔除雾器&二通道除雾器 施工方法
- 相关产品：
安国脱硫塔除雾器
安国脱硫塔除雾器主要是由波形叶片、板片、卡条等固定装置组成，在湿法脱硫，吸收塔在运行过程中，易产生粒径为10--60微米的“雾”，“雾”不仅含有水分，它还溶有盐等，同时也造成风机、热交换器及烟道的玷污和严重腐蚀，因此，湿法脱硫工艺上对吸收设备提出除雾的要求，被净化的气体在离开吸收塔之前要除雾。
安国脱硫塔除雾器冲洗系统设计标准和性能
冲洗喷嘴是除雾器冲洗系统中重要的执行部件。对于每一款的喷嘴，我们在工程应用之前都进行可行性分析，在模拟的环境中进行喷洒分布分析、喷射冲击力测量、喷洒液滴尺寸分析、喷洒角度测量和材料磨损试验，通过建立数学模型选择喷嘴的喷射压力和喷射角度，以及相邻喷嘴的间距，以达到冲洗效果。
冲洗喷嘴是除雾器冲洗系统中重要的执行部件。对于每一款的喷嘴，我们在工程应用之前都进行可行性分析，在模拟的环境中进行喷洒分布分析、喷射冲击力测量、喷洒液滴尺寸分析、喷洒角度测量和材料磨损试验，通过建立数学模型选择喷嘴的喷射压力和喷射角度，以及相邻喷嘴的间距，以达到冲洗效果。
客户案例：
石家庄的李总是在2016的十一月份购买的我公司的玻璃钢除雾器，用于保定工程使用。
客户评价：
质量好，物流快，并且荣驰与其他**业公司不同，他们有专业的设计团队，提供的设计方案新颖和实用，并且他们的操作规范，流程紧密，有据可依，并且态度好，让我很满意。
直销电话： Q
石家庄的李总是在2016的十一月份购买的我公司的玻璃钢除雾器，用于保定工程使用。
客户评价：
质量好，物流快，并且荣驰与其他**业公司不同，他们有专业的设计团队，提供的设计方案新颖和实用，并且他们的操作规范，流程紧密，有据可依，并且态度好，让我很满意。
直销电话： Q
Mist eliminator Flushing waterpressure
The water pressure of the demister is generally determined by the distance between the characteristics of the flushing nozzles and the demister (the distance between the nozzle and the demister is generally 650-900mm), and the washing effect is poor when the water pressure is low. The high pressure of washing water can cause the two time to bring water to the flue gas. At the same time, the service life of the blade is reduced. In general, the first grade demister uses two layers of flushing, and the front layer of the flue gas (the mist eliminator) is flushed up, the water pressure is less than 2.5-105pa, and the deatomizer is washed down on the back of the mist, and the water pressure is 1. 5-105pa within. The two stage mist eliminator is washed by one layer and the same level as hydraulic pressure. The reverse side does not wash, so as not to cause two times to carry. The specific value must be determined according to the working condition.
Contact number： Q
The water pressure of the demister is generally determined by the distance between the characteristics of the flushing nozzles and the demister (the distance between the nozzle and the demister is generally 650-900mm), and the washing effect is poor when the water pressure is low. The high pressure of washing water can cause the two time to bring water to the flue gas. At the same time, the service life of the blade is reduced. In general, the first grade demister uses two layers of flushing, and the front layer of the flue gas (the mist eliminator) is flushed up, the water pressure is less than 2.5-105pa, and the deatomizer is washed down on the back of the mist, and the water pressure is 1. 5-105pa within. The two stage mist eliminator is washed by one layer and the same level as hydraulic pressure. The reverse side does not wash, so as not to cause two times to carry. The specific value must be determined according to the working condition.
Contact number： Q
联系电话是13932819705, 主要经营模压化粪池 、玻璃钢桥架、除雾器。
单位注册资金单位注册资金人民币 100 - 250 万元。
