邹城平板式脱硫塔材料要求
1、除雾器管道、法兰采用玻璃钢FRP,喷嘴采用PP-R材质。
2、垫圈采用EPDM。
3、所有法兰采用HG20592标准。
4、除雾器材料性能完全满足使用工况要求。
邹城平板式脱硫塔冲洗周期
冲洗周期是指除雾器每次冲洗的时间间隔。由于除雾器冲洗期间导致烟气带水量加大所以冲洗不宜过于频繁,但也不要间隔太长,否则易产生结垢现象,除雾器的冲洗周期主要根据烟气特征及吸收剂确定,一般以不**过2h为宜,也就是不冲洗为冲洗时间的3~6倍;循环单道时间在20-60秒之间。
客户案例:
北京市的张女士在2017年1月份从我们公司一批玻璃钢材质的除雾器。
客户评价:
我对玻璃钢除雾器并不是太了解,选购的时候也比较迷茫,贵公司的销售经理告诉我如何辨别玻璃钢除雾器质量的好坏。贵公司给我寄了一个样品,质量完全符合行业规格,然后我就从贵公司订购了产品。
销售电话: Q
Mist eliminator application: suitable for separation of vertical airflow, low flow rate of flue gas and low requirements for demister performance. It is one of the early equipment in the field of desulphurization and demister, and now it is mainly applied to projects with small diameter and low demister requirements.
Mist eliminator Product Description: the top mounted in the desulfurization tower is suitable for gas-liquid separation of vertical airflow, and the droplets separated fall directly into the slurry tank. According to the different processing requirements, it can be configured as a two or three layer demister, and the blade can be selected in different forms according to the needs. Each layer of the mist eliminator is equipped with its own flushing system.
The general layout of mist eliminator is two stage mist eliminator and three flushing system. First stage mist eliminator blades: streamlined, blade spacing 30mm; two stage mist eliminator blades: streamlined, blade spacing 27.5mm.
Extension phone: Q