公司采用成熟的项目管理模式,从设计、制造以及技术培训、售后服务等各个环节进行方位、全过程的精心组织。对关键环节重点把关,形成了系统化的项目管理优势。
公司充分考虑项目的实际工艺需要,在保证产品质量、性能要求的前提下,努力降低工程造价和运行成本,以达到客户价值。
联系电话: Q
樟树玻璃钢除雾器功能、叶片形式与布置形式
1、除雾器功能简介
除雾器用来分离烟气所携带的液滴。在吸收塔内,由上下二级除雾器(水平式或菱形)及冲洗水系(包括管道阀门和喷嘴等)组成。经过净化处理后的烟气,在流经两级卧式除雾器后,其所携带的浆液微滴被除去。从烟气中分离出来的小液滴慢慢凝聚成较大的液滴,然后沿除雾器叶片往下滑落至浆液池。在一级除雾器的上、下部及二级除雾器的下部,各有一组带喷嘴的集箱。集箱内的除雾器清洗水经喷嘴依次冲洗除雾器中沉积的固体颗粒。经洗涤和净化后的烟气流出吸收塔,通过烟气换热器和净烟道排入烟囱。
2、除雾器本体除雾器本体由除雾器叶片、卡具、夹具、支架等按一定的结构形成组装而成。
其作用是捕集烟气吕中的液滴及少量的粉尘,减少烟气带水,防止风机振动。除雾器叶片是组成除雾器的基本、重要的元件,其性能的优劣对整个除雾系统的运行有着至关重要的影响。除雾器叶片通常由高分子材料(如聚丙稀、FRP等)或不锈钢(如317L)2大类材料制作而成。除雾器叶片种类繁多。按几何形状可分为折线型(a、d)和流线型(b、c),按结构特征可分为2通道叶片和3通道叶片。
What is Mist eliminator ?
In fact, the desulfurization tower is divided into three functional areas. The demister is a functional area in the design of desulfurization tower, and is an essential part of the desulfurization tower. It is a functional equipment area for defrosting sulfur containing flue gas.
In the process of industrial exhaust emission, the separation of gas and liquid is an important task. Then the demister is used at this time, and then we will find out how the demister separations the gas and liquid.
First, the unique structure of the mist eliminator separates the gas to be processed into many single strand channels.
Two, the gas separates a lot of droplets and droplets during the continuous separation process. Under the action of inertia, the droplets and droplets collide with the wave blade of the mist eliminator to form a layer of liquid film.
Three. The mist eliminator has a special turning point. The liquid film will be separated from the corner and flow to the equipment under the container as the flow moves forward.
Direct selling telephone: Q