客户案例:
于2016年的6月中旬,齐齐哈尔的李总在我公司订购了一批玻璃钢除雾器。
客户的评价:
自从使用了贵公司生产的玻璃钢除雾器,比起以前使用铸铁材质的除雾器使用多了,不会生锈,也不需要我们的工作人员定期的检查,物流快,服务态度好,主要的是玻璃钢除雾器的质量好。
订购热线: Q
安徽喷淋塔除雾器的冲洗水压
除雾器水压一般根据冲洗喷嘴的特征与除雾器之间的距离等因素确定(喷嘴与除雾器之间的距离一般为650-900mm),冲洗水压低时,冲洗效果差。冲洗水压高则易造成烟气二次带水。同时降低叶片使用寿命。一般情况下,一级除雾器采用两层冲洗;及烟气的正面一层(除雾器对烟气的临界面)向上冲洗,水压为2.5-105pa以内,除雾器的背面一层向下冲洗,水压为1.5-105pa以内.二级除雾器采用一层向上冲洗,水压同一级同样。反面不冲洗,以免造成二次携带。具体的数值需根据工况情况而定。
我公司--是一个从事环保产品研制生产的专业厂家,公司主要产品范围包括环保设备、脱硫系统除雾器、净化塔除雾器、玻璃钢除雾器、pp除雾器等。
厂家直销热线: Q
安徽喷淋塔除雾器的冲洗水量
选择除雾器冲洗水量处理需要满足除雾器自身的要求外,还需要考虑系统水平衡的要求有些条件下需采取大水量短时间冲洗,有时则采用小水量长时间冲洗,具体冲洗水量需由工况条件确定,一般情况下除雾器断面上舜时冲洗水量约2-4.5m3/h
What is the Mist eliminator security factor?
The safety factor is the basis for the selection and use of equipment. In the future, if there is a need to use or choose the demister in the future, the key is to leave enough time, to compare carefully in the market, to select and purchase performance and quality guarantee, to design a reasonable, regular and high quality mist eliminator.
Safe use and protection will bring fog to us while the safety of the equipment itself can not be ignored. Whether it is the components of the parts, or the structure and design of the basic, we may well know more before we choose and buy, not to buy expensive products, only to choose the kind that can meet the needs of our application.
Excellent performance, greater adaptability to the environment, and so on, are all the mist eliminator can help us. Construction and installation is not a standard. It is also a key factor that can not be ignored for normal use.
To strengthen the maintenance of mist eliminator, the parts that have been seriously damaged and lose their value will be replaced in time. Cooperation with the relatively good after-sales service manufacturers can ensure timely treatment and regular maintenance.
Spot supply: Q