公司采用成熟的项目管理模式,从设计、制造以及技术培训、售后服务等各个环节进行方位、全过程的精心组织。对关键环节重点把关,形成了系统化的项目管理优势。
公司充分考虑项目的实际工艺需要,在保证产品质量、性能要求的前提下,努力降低工程造价和运行成本,以达到客户价值。
联系电话: Q
娄底脱硫除雾器的安装:
除雾器湿法脱硫工艺上对吸收设备提出除雾的要求,被净化的气体在离开吸收塔之前要除雾。
除雾器系统由娄底脱硫除雾器本体及冲洗系统组成。具体为二级除雾器本体、冲洗水管道、喷嘴、支撑架、支撑梁及相关连接、固定、密封件等组成。
娄底脱硫除雾器故障对策
除雾器制定故障对策的目的是要把前面所述的五个故障要因作为基本点加以彻底清除。除雾器为此必须根据5个要因各自的特性制定出有效的手段。
解决的方法分为两类。一类是齐备基本条件、齐备使用条件、复原劣化。这种方法对过去或现在发生的故障不作原因追究,而是分别从齐备基本条件、齐备使用条件和复原劣化这3个方面出发研究设备本来的应有状态,并恢复其应有的状态。这种方法称作设计(构思)解决法。要恢复设备的应有状态,需要相应的技能(基本技能)配合。基本技能的学习和掌握,应在实践中进行为有效,即称之为岗位成才。
通过对上述三个项目的恢复,相当多的故障得到排除,但是对于设备设计上的弱点和固有技能的缺乏,用上述方法则行不通。对付这两个原因,应对发生的故障现象分别研究其原因,采取分析性的个别对策来解决。采取这类方法时必须正确捕捉现象,严格认真地分析,经过1~3次的要因研究,真正抓住设备在设计上的弱点和对技能的要求。然后推进个别对策,许多要因就会随着应有状态的实现而得到稳定,使真正原因容易发现和掌握,从而使采取的措施能直接发挥效果。在应有状态的设定中,如有模糊不清的部分,除雾器也可以通过个别对策的完善得到弥补。
Use of FRP mist eliminator
The main function of the FRP mist eliminator is to filter the mist and dust in the gas phase and complete the two separation of gas and liquid. The application of the demister is very important for environmental protection. Many industrial wastes are dust particles. The removal method is to integrate the particles into water and other solutions, and then use the mist eliminator to complete the gas liquid separation and reduce the influence of the pollutants on the surrounding environment.
The specific applications of different kinds of fogs in the industrial production are different. The deatomizer and the vanes deatomizer are mostly used for the separation of salt particles in the flue gas desulfurization system, while the screen filters are mostly used in the fields of environmental protection engineering, such as distillation, evaporation and absorption.
Direct selling: Q