- 1385
- 产品价格：面议
- 发货地址：河北衡水枣强县 包装说明：按要求包装
- 产品数量：2516538.00 平米产品规格：规格齐全，可定制
- 信息编号：91157524公司编号：14468070
- 徐经理 微信 139328197..
- 进入店铺 在线咨询 QQ咨询 在线询价
牙克石脱硫除雾器 除雾器专业生产商
- 相关产品：
牙克石脱硫除雾器
我公司是从事除雾器产品的制造、销售于一体的现代化企业。本公司以先进的生产工艺、严格的质量管理来生产除雾器产品。依靠高科技推出节能、环保精品，奉献社会。宗旨“真诚奉献、跟踪服务、用户至上、质量**”，我公司全体员工愿以优质的产品、服务与国内外客户共创辉煌。
厂家直销热线： Q
厂家直销热线： Q
牙克石脱硫除雾器材料要求
1、除雾器管道、法兰采用玻璃钢FRP，喷嘴采用PP-R材质。
2、垫圈采用EPDM。
3、所有法兰采用HG20592标准。
4、除雾器材料性能完全满足使用工况要求。
1、除雾器管道、法兰采用玻璃钢FRP，喷嘴采用PP-R材质。
2、垫圈采用EPDM。
3、所有法兰采用HG20592标准。
4、除雾器材料性能完全满足使用工况要求。
牙克石脱硫除雾器为什么除雾达不到预期效果...
并不是所有的除雾器都是能达到预想的结果的，有的时候如果清晰不当的话也是会出问题的，比如所容易造成叶片的结垢的，造成FGD系统的整体瘫痪的。
一般如果除雾器除雾效果差的话会进入GGH的净烟气中有包含石膏颗粒或者是尘粒液滴的，这样会导致GGH的结垢堵塞的。
究其原因有几个方面的原因：
1.原烟气流经电除尘器后进入FGD系统烟气中的剩余粉尘。
2.经除雾器后净烟气携带的含有石膏颗粒及尘粒液滴在GGH受热面表面蒸发结晶的产物。原烟气中携带粉尘较易清除，且目前火力发电机组所配备的除尘器一般均能满足FGD系统运行需求。
综上所述，除雾器运营不当或者是除雾效果变差等都会造成湿法脱硫中GGH堵塞的，这是主要的原因。
并不是所有的除雾器都是能达到预想的结果的，有的时候如果清晰不当的话也是会出问题的，比如所容易造成叶片的结垢的，造成FGD系统的整体瘫痪的。
一般如果除雾器除雾效果差的话会进入GGH的净烟气中有包含石膏颗粒或者是尘粒液滴的，这样会导致GGH的结垢堵塞的。
究其原因有几个方面的原因：
1.原烟气流经电除尘器后进入FGD系统烟气中的剩余粉尘。
2.经除雾器后净烟气携带的含有石膏颗粒及尘粒液滴在GGH受热面表面蒸发结晶的产物。原烟气中携带粉尘较易清除，且目前火力发电机组所配备的除尘器一般均能满足FGD系统运行需求。
综上所述，除雾器运营不当或者是除雾效果变差等都会造成湿法脱硫中GGH堵塞的，这是主要的原因。
The working principle of FRP mist eliminator:
The blade shape of sinusoidal surface is used for defrosting of vertical airflow.
When smoke and droplets flow in the blades, they will collide with the wall of the blades constantly, and the kinetic energy will disappear.
The droplets that lose speed are separated from the flue gas and remain on the surface of the blade, and then fall into the slurry tank.
The FRP mist eliminator must work below critical gas velocity. Otherwise, the fog drops are carried and failed.
(1) fog removal efficiency: under normal operating conditions, the droplet concentration in the flue gas of the FRP mist eliminator is less than 75mg/Nm3.
(2) pressure drop: without considering the interference before and after the mist eliminator, the pressure drop of the whole FRP mist eliminator system is less than 120Pa under the 99.99% flue gas load.
(3) high temperature resistance: 80--95 C.
(4) withstand voltage: ensure that the blade can work normally when the flushing water pressure is 0.3MPa.
(5) flushing nozzle: full cone nozzle, flushing water angle of 90 - 120 degrees, spraying solid cone, can ensure that all blades are covered. (the water consumption of a large gas load is designed, taking into account the requirements of the water balance of the system. If the gas load is reduced, the water consumption can be reduced by half by increasing the interval of the flushing interval).
The blade shape of sinusoidal surface is used for defrosting of vertical airflow.
When smoke and droplets flow in the blades, they will collide with the wall of the blades constantly, and the kinetic energy will disappear.
The droplets that lose speed are separated from the flue gas and remain on the surface of the blade, and then fall into the slurry tank.
The FRP mist eliminator must work below critical gas velocity. Otherwise, the fog drops are carried and failed.
(1) fog removal efficiency: under normal operating conditions, the droplet concentration in the flue gas of the FRP mist eliminator is less than 75mg/Nm3.
(2) pressure drop: without considering the interference before and after the mist eliminator, the pressure drop of the whole FRP mist eliminator system is less than 120Pa under the 99.99% flue gas load.
(3) high temperature resistance: 80--95 C.
(4) withstand voltage: ensure that the blade can work normally when the flushing water pressure is 0.3MPa.
(5) flushing nozzle: full cone nozzle, flushing water angle of 90 - 120 degrees, spraying solid cone, can ensure that all blades are covered. (the water consumption of a large gas load is designed, taking into account the requirements of the water balance of the system. If the gas load is reduced, the water consumption can be reduced by half by increasing the interval of the flushing interval).
联系电话是13932819705, 主要经营模压化粪池 、玻璃钢桥架、除雾器。
单位注册资金单位注册资金人民币 100 - 250 万元。
