安庆脱硫塔除雾器材料要求
1、除雾器管道、法兰采用玻璃钢FRP,喷嘴采用PP-R材质。
2、垫圈采用EPDM。
3、所有法兰采用HG20592标准。
4、除雾器材料性能完全满足使用工况要求。
通过安庆脱硫塔除雾器断面的烟气流速过高或过低都不利于除雾器的正常运行,烟气流速过高易造成烟气二次带水,从而降低除雾效果,同时流速过高造成系统阻力大,能耗高。通过除雾器断面的烟气流速过低,不利于气液分离,同样不利于除雾效果。此外设计的流失低,吸收塔断面尺寸加大,投资也随之增加。设计烟气流速应接近临界流速。根据不同除雾器叶片结构及布置形式,设计流速一般选定在3.5-5.5m/s之间。烟道式可在3.5-7.0m/s之间。据了解,针对环保行业PPP支付机制不健全、中小型企业成本高等问题,、及金融机构制定了较多绿色金融政策。但有业内人士认为,政策普遍操作性。诚如金融机构按照放贷流程和进行评审和放贷,无法民营资本的时效性及低成本需求,急需创新金融投解决难成本高难题。
客户案例:
山东省济宁市的赵经理,在2017年3月份在我公司订购了一批玻璃钢除雾器。
客户感言:
之所以选择贵公司的产品,是应为在**中有不少人在使用,而且在使用中没有发现质量问题,所以再三的对比下,再贵公司定下了一批。
枣强县荣驰玻璃钢有限公司位于河北省衡水市枣强县,交通便利。我公司拥有先进的废气治理技术、较效的脱硫、除雾设备。凭借着先进的技术、精良的工艺、优良的品质、完善的管理体制和员工。
我们在技术方面的持续更新、产品质量的稳步改进以及完善的服务体系,帮助客户节省成本、长期制造价值。我公司争做行业榜样、创**名企,我们坚守诚信经营,做良心产品,做好每一个细节,以客户满意为原则,为客户提供品质的产品和贴心的服务。
咨询电话: Q
Mist eliminator purpose
The demister is used to separate the liquid droplets of the gas entrainment in the tower, so as to ensure the mass transfer efficiency, reduce the valuable material loss and improve the operation of the post compressor, generally, the mist eliminator is usually set up on the top of the tower. The droplet of 3--5um can be removed effectively. If the foam eliminator is installed between the trays, the mass transfer efficiency of the tray can be ensured, and the space between the plates can also be reduced. So the demister is mainly used for the separation of gas and liquid. The air filter can also be used for gas separation. In addition, the screen can also be used as a buffer for various meters in the instrument industry to prevent radio wave interference.
Extension phone: Q